Best Chargers for the 12.9 Inch iPad Pro and the 10.5 Inch iPad Pro

(Last Updated On: September 22, 2019)

Tablets are very large devices and the main thing to know is that when it comes to devices that are large and portable is that they usually have large batteries. This is very true when it comes to tablets as most tablets have battery capacities that are within the 4,000mAh range and over.

That said, this Guide is for one of the most famous types of tablets, which are the iPads. Specifically, this is a guide for the best chargers that you can use with your 12.9 Inch iPad Pro and also with your 10.5 Inch iPad Pro.

Both of these iPad Pro tablets are the largest ones that Apple have and that is the main reason to know what chargers are best to use with them. As these two tablets have massive batteries.

The 12.9 Inch iPad Pro has a 41Wh battery and that translates over to a 10,875mAh battery capacity.

Then the 10.5 Inch iPad Pro has a 30.8Wh battery and that means it has an 8,169mAh power capacity.

Top Rated Chargers in this Guide:

[content-egg module=Amazon template=list]

Knowing How Much Battery Power there Is

Just how did we get these mAh ranges for the batteries that these tablets have? Just take a look at the calculations below. Since we already know the Wh of the battery and the Voltage of the battery which is 3.77V for both of them; we are then able to get the mAh of the battery.

Wh x 1000 / V = mAh

12.9 Inch iPad Pro Capacity:

41Wh x 1000 / 3.77 = 10,875mAh

10.5 Inch iPad Pro Capacity

30.8Wh x 1000 / 3.77 = 8,169mAh

The main reason that we’re paying so much attention to the mAh, which is the power capacity of this tablet, is to put into perspective of just how much power this is.

Since this guide for chargers for this tablet includes portable chargers that have enough power capacity to charge these very large tablets.

Of course, the other type of chargers do matter but their speeds matter more, as USB wall chargers and car chargers don’t have an internal storage of power.

So let’s see what types of portable chargers are best to use with your iPad Pro Tablets.

Choosing a Portable Charger

When it comes to portable charging, the type of portable charger that you’re going to get will vary depending on what device you’re planning on charging.

That’s because if you’re charging a smartphone such as an iPhone SE with its 1,624mAh power capacity, then maybe a 5,000mAh or 10,000mAh power bank will suffice.

Not with the iPad Pro though, as these Tablets have lots of power and that means you’re going to need a high capacity power bank for these devices. Another part is that most of the iPad lineup has a max charging speed of 5V/2.4A.

While the iPad Pro 12.9 inch tablet is actually compatible with Power Delivery, and that’s why we’ve also added some Power Delivery chargers into this guide. Keeping a lookout for these major specifications when it comes to a power bank and also any other charger is very important.

RAVPower 32,000mAh Portable Charger

We’re starting off strong when it comes to charging on-the-go with your iPad because this power bank has a 32,000mAh power capacity. It’s with this power capacity that you’re going to be able to charge both of these types of iPad Pro tablets to their max power about 2.5 times to their max power.

Tons of Power to Use for other Devices Too

It’s just important to remember that we’re basing these max full power charges assuming that you’re charging the tablet alone. If you’re charging another device with a portable charger at the same time, then, of course, the power capacity will be split between devices.

You also have to consider things like the conversion of power, as you’re not going to receive the full power of any portable charger because some power is lost during charging.

With all that said, this RAVPower portable charger with its 32,000mAh is one of the highest capacity portable chargers on the market that still holds a form factor that makes it somewhat easy to take around.

The reason that it’s somewhat easy to take on-the-go with you is that this is quite a lot larger compared to other chargers that have lower power capacities.

Just don’t expect it to fit into your pocket. Power is really the name of the game when it comes to this segment of portable chargers.

Three Ports to Use

This RAVPower portable charger also has 3 USB Ports along with its very high power capacity. Each of the USB charging ports has a charging speed of 5V/2.4A and that means they can charge your iPad Pro at its max charging speed.

Not only that, since the Max Output of this portable charger is 6A, you can potentially charge 2 iPad Pro tablets at their max charging speed at the same time.

Read Review for RAVPower 32,000mAh Power Bank

Specs of the RAVPower 32,000mAh Power Bank:

  • Capacity: 32,000mAh
  • Output: 2.4A Per Port | 6A Max Output
  • Input: 2.4A via Micro USB Input
  • LED Power Indicators: Four-LED status system
  • Size: 7.7 x 5 x 1.5 inches
  • Weight: 1.6 Pounds

Anker PowerCore 20100

Pic 1

One of the Anker’s flagship portable charger, this Anker PowerCore 20100 is one of the best selling on Amazon currently and for good reasons too. Well, the portable charger doesn’t really have anything too amazing going with it, as it has a 20,100mAh power capacity.

That said, its power capacity can basically charge an iPad Pro to its full power about 1.5 times. What makes this charger really good though is the size and sleek design.

Anker’s most Popular High Capacity Power Bank

Most of the time when it comes to 20,000mAh portable chargers and beyond, we expect ones that are very large and heavy. This PowerCore 20100 charger is quite large and has some weight too, but it’s at a very manageable level. It’s quite good to hold in your hands and you can even fit into a back pocket for some time until you need to use it.

The PowerCore 20100 portable charger uses 2 USB Ports and each of those USB ports has a charging speed of 5V/2.4A.

So you can charge your iPad Pro at its max speed. The max Output of the power bank is 4.8A. As a result, you can charge 2 iPad Pro tablet at their max charging speeds.

Read Review for Anker 20100 Power Bank

Specs of the Anker PowerCore 20100:

  • Capacity: 20,100mAh
  • Output: 2.4A Per Port | 4.8A Max Output
  • Input: 2.0A via Micro USB Input
  • LED Power Indicators: Four-LED status system
  • Size: 6.5 x 2.3 x 0.9 inches
  • Weight: 12.6 ounces
  • 18-month warranty

Jackery Max 26,000mAh Power Bank

This Jackery Max portable charger is one of the latest high capacity power banks from Jackery and we have to commend Jackery for creating such a powerful charger. As this Jackery Max charger has a 26,000mAh power capacity and that means it can charge an iPad Pro to its full power about 2 times.

However, as plentiful as the power capacity of this charger is, the other main event of it is the charging capabilities that this charger has.

Three Powerful Ports

There are 3 USB Ports. Two of the USB Ports each have a standard charging speed of 5V/2.4A. The third Output port uses Quick Charge and that means you can charge your Quick Charge compatible devices at their max charging speeds.

The max Output of the power bank is 6A.

As a result, you can very well charge your iPad Pro with one of the 2.4A USB Ports and then you can charge a Quick Charge compatible smartphone at its max charging speed at the same time.

One of the very convenient factors that this portable charger has is the usage of an LCD power capacity display, so you can tell what the power capacity is in a percentage manner.

Read Review for Jackery Max Power Bank

Specs of the Jackery Max Power Bank:

  • Capacity:            Advertised: 26,000mAh            Real Capacity: 19,000mAh
  • Output:     USB Port 1: 5V/2.4A        USB Port 2: 5V/2.4A      Quick Charge Port: 3.6-5V/3.0A |5V-9V/1.67A | 9V-12V/1.25A         Max Output: 6 Amps
  • Input:    5V/2.0A Via Micro-USB Input
  • LED Power Indicators: LCD Power Capacity Display
  • Size: 6.6 x 3.9 x 0.9 inches
  • Weight: 1.6 Pounds

Aukey 30,000mAh Power bank with Quick Charge and USB-C

This Aukey 30,000mAh Portable is, of course, a great candidate for being a charger for your iPad Pro. Well, the obvious reason to get out of the way first and that would be the fact that this charger is able to charge your iPad Pro tablet to its max power about 2.5 times.

This is really good as you can basically rely on this power bank to keep your iPad Pro usable for basically a few weeks if you don’t have a stable source of power such as a USB wall charger.

When it comes to the charging this power bank has to offer, then there’s quite a lot going on. It has a single standard USB, then it has a Quick Charge USB port and there’s also a third Output which is the Type-C port.

Many Powerful Ports

The standard port on this power bank has a 2.4A charging speed and that is one that you’re going to want to charge your iPad Pro with as it’ll charge it at its max charging speed. Then if you’ve got a Quick Charge compatible smartphone, you can charge it with the Quick Charge port.

That said, the Quick Charge USB port is basically just like the standard port, so you can also use it to charge Non-Compatible Quick Charge devices too.

The Type-C charging ports on this power bank have a charging speed of 5V/3.0A and it can be used as an Output port when you use a USB-C to USB-C charging cable. However, it’s important to know that you can only use the Type-C port with Type-C compatible devices only.

Recharge Quickly

Another strong aspect of this portable charger is the recharging.

That’s because there are two  Input ports. The Type-C port on this power bank can be used as an Input, and it also has a Micro-USB Input too.

Both of these Input ports can be used at the same time to recharge this 30,000mAh power bank at 4A charging speeds and that results in a 8 hour full recharge time.

An 8 hour recharge time is really good considering this charger has a 30,000mAh power capacity.

Read Review for Aukey 30,000mAh Power Bank

Aukey 30,000mAh Portable Charger with Quick Charge 3.0:

  • Capacity:            Advertised: 30,000mAh             Real Capacity: 27,000mAh
  • Output:

Quick Charge 3.0 Port Charging Speeds: 3.6V-6.5V/3A, 6.5V-9V/2A, 9V-12V/1.5A

AiPower Port Charging Speed: 5V/2.4A

USB Type-C Output Port: 5V/3.0A

  • Input:

USB Type-C Input Port: 5V/2.0A     Individual Usage: 5V/3.0A

Micro-USB Input Port: 5V/2.0A       Individual Usage: 5V/2.4A

  • LED Power Indicators: Power Button Indicates 3 Colors
  • Size: 5.9 x 3.3 x 1.1 inches
  • Weight: 1.4 pounds

Anker PowerCore+ 26800 Power Delivery Portable Charger

The first Power Delivery portable charger that we have to recommend is Anker’s PowerCore+ 26800 portable charger. This power bank has a lot of power capacity and it’s completely fitting as the iPad Pro 12.9 tablet has a 10,000mAh battery capacity.

So you can basically charge the iPad to its full power about two times with this power bank if that’s all you’re charging it with.

The charging power with this power bank is also another great part of it.

Power Delivery along with Two Powerful USB-A Ports

That’s because there are three output charging ports. There are two USB-A ports, with each of the USB-A ports outputting a charging speed of 5V/3.0A.

The USB-C port is the third output and in this case, to charge your iPad Pro at its max charging speed, you would use a USB-C to Lightning charging cable.

As the iPad Pro has a max charging speed of 29W, and this PowerCore+ portable charger has an output of 30W. So you can charge it at its max charging speed.

Recharge with the Included PD Wall Charger

Recharging this power bank is done through the USB-C Power Delivery port, too.

You can actually recharge this power bank at Power Delivery speeds when you use a USB-C Power Delivery wall charger, and the best part is that this power bank actually comes with a Power Delivery wall charger.

Read Review for Anker PowerCore+ 26800 Power Bank

Specs of the Anker PowerCore+ 26800 Power Bank with 30W Power Delivery Charger:

  • Capacity:

Initial Capacity: 26,800mAh

Output Capacity: 20,000mAh

  • Output:

Both USB-A Charging Ports: 5V/3.0A

USB-C Port: 30W

  • Input: 30W through USB-C input with USB-C Wall Charger
  • LED Power Indicator: Yes
  • Size: 6.5 x 3.1 x 0.9 inches
  • Weight: 1.3 Pounds

iMuto 20,100mAh Power Delivery Portable Charger with Quick Charge

The one other Power Delivery portable charger that we find worth getting for charging your iPad Pro and other Power Delivery compatible devices, is this iMuto power bank. It doesn’t have as high as a power capacity as the Anker portable charger that we just mentioned. That said, it still has a 20,100mAh power capacity that can charge a tablet to full power about 1.5 times.

Minimal but Powerful Charging

There are two output ports to charge your devices with this power bank. There’s a USB-A port that uses Quick Charge that can charge Quick Charge compatible devices at their max charging speed and standard devices too.

Then there’s the USB-C Power Delivery port that actually has a faster charging speed than most other Power Delivery chargers because it has 45W of charging power. While most other Power Delivery chargers provide 30W.

So this iMuto power bank can charge your iPad Pro at its max charging speed.

Not only that but if you own a USB-C compatible MacBook Pro then it’s able to charge that laptop faster than a standard USB-C port.

Recharge through One of Two Ports

To recharge this power bank you can use the USB-C port and the power bank can recharge at Power Delivery speeds when you use a USB-C Power Delivery wall charger.

There’s also a Micro-USB input, but that has a much slower recharging speed.

Read Review for iMuto 20,100mAh Power Delivery Portable Charger with Quick Charge

Specs of the iMuto 20,100mAh 45W USB-C Power Delivery Portable Charger:

  • Capacity:

Initial Capacity:  20,100mAh

Output Capacity: 15,000mAh

  • Output:

USB-C Power Delivery: 5V-20V/2.25A (45W)

USB-A Quick Charge Port: 5V/3A | 9V/2A

  • Input:

USB-C Power Delivery Input: 5V-20V/2.25A (45W)

Micro-USB Input: 5V/2.1A

  • LED Power Indicator: 4 Blue LED Power Capacity Indicators
  • Size: 6.3 x 3 x 0.8 inches
  • Weight: 13 Ounces

USB Wall Chargers to Use

Wall chargers are the most used type charging electronics and the reason for that is because of just how powerful they are. These type of chargers are stationary and yet they’re very powerful and can tend to have lots of USB charging ports to charge lots of devices at the same time.

PowerPort 2

One of the simplest USB wall chargers to use with an iPad Pro or really any other iPad for that matter is to use one with 2 USB charging ports.

Use Both Ports at Full Power

That’s because this PowerPort 2 USB charger is quite powerful for what it has, with 2 charging ports and each of the two ports has a charging speed of 2.4A.

The max output of the charger is 4.8A. So each of the ports is able to charge an iPad at its max charging speed and you can even charge two iPads at the same time at their max charging speeds as well.

The use of Two Ports = Awesome Portability

This is the type of wall charger that you want to aim at getting. Not really when it comes to the number of USB ports that it has, but because of the power that it provides.

The portability of this charger is also really good because it has a retractable AC Adapter that makes the charger a lot easy to take everywhere.

Read Review for Anker PowerPort 2

Specs of the Anker PowerPort 2:

  • Ports: 2
  • Quick Charge: No
  • Output: 2.4A Per Port
  • Protective Technology: Yes
  • Size: 2.2 x 2.2 x 1.1 inches
  • Weight: 4.6 ounces

Aukey 5 Port USB Charging Station

Then there are USB charging stations and these are basically like USB wall chargers, but they use a power cord instead of a built-in AC Adapter. These chargers are highly useful because of the amount of charging that they have.

The above charging station has 5 USB charging ports and so you can charge 5 devices at the same time.

A Charger the Whole Family can Use

What’s even better is that each of the ports has a charging speed of 5V/2.4A and so can charge an iPad at its max charging speed no matter what port you’re using to charge it with.

Charging stations also tend to have great max outputs, as this Aukey 5 port charger has a 10A max output, which means you can potentially charge 5 iPads at the same time and each of them would charge at a 5V/2.0A charging speed.

However, if you want to charge multiple iPads at the same time at their max charging speed, then you’d charge 3 iPads at the same time.

Specs of the Aukey 5-Port USB Charging Station:

  • Ports: 5
  • Quick Charge: No
  • Output: 2.4A Per Port | 10A Max Output
  • Input: AC 100-240V
  • Size: 3.7 x 2.4 x 1 inches
  • Weight: 3.2 ounces

PowerPort Speed 4

The last type of USB wall chargers that we highly recommend to use with your iPad and also one that you can use if you have a Quick Charge compatible device; is one that uses Quick Charge with one or a few of their USB charging ports.

These USB wall chargers tend to have a few ports at a charging speed of 5V/2.4A and then they have some ports that use Quick Charge.

Great for Portability and Charging Many Devices

A great charger like that is this Anker Powerport Speed 4. That has 4 USB ports. One of the USB ports uses Quick Charge to charge compatibles smartphones at their max charging speed.

Then the other 3 ports have a charging speed of 5V/2.4A. It’s a great combination of charging your iPads at its max speed and at the same time charge your smartphone that’s compatible with Quick Charge.

Read Review for Anker PowerPort Speed 4 Wall Charger with Quick Charge

Specs of the PowerPort Speed 4:

  • Ports: 4
  • Quick Charge: Yes
  • Output: Power iQ Ports: 5V/2.4A | Quick Charge Port
  • Input: AC 100-240V
  • Size: 2.7 x 2.7 x 1.1 inches
  • Weight: 5 Ounces

Anker PowerPort II USB-C Power Delivery Wall Charger

This is another PowerPort 2 wall charger from Anker, but this one actually makes use of Power Delivery. This charger has a USB-C Power Deliver port that has an output of 30W.

Anker’s PoweriQ 2.0 Tech

Then the other port is a USB-A port that has a charging output of 19.5W.

What makes the USB-A port on this charger special is that its Quick Charge compatible so Quick Charge compatible smartphones can charge at their max charging speed.

Standard devices can also charge at fast charging speeds using the USB-A port.

That said, for charging Power Delivery compatible devices such as your iPad Pro, it’s best to use the USB-C port because it can charge the iPad at its max charging speed.

Powerful Charging with a Small Form Factor

The form factor of this charger is another great reason to purchase this charger because it has a length/width of 2.7 inches and the thickness of this charger is 1.1 inches.

So you can practically just place this Power Delivery charger in your back pocket because it also uses a retractable AC adapter.

Read Review for Anker PowerPort II USB-C Power Deliver Wall Charger

Specs of the Anker PowerPort II USB-C Power Delivery Wall Charger:

  • Output:

USB-C Power Delivery Port: 30W

USB-A Port: 19.5W

  • Input: 100-240V AC
  • LED Power Indicator: 1 Blue LED Power Indicator
  • Size: 2.7 x 2.7 x 1.1 inches
  • Weight: 6.4 Ounces

Anker RAVPower 5-Port Power Delivery USB-C Charging Station

RAVPower 5-Port Power Delivery USB-C Charging Station

The one other Power Delivery wall charger that we find the best to use for charging with your iPad Pro is this RAVPower Power Delivery 5-port charging station. It has five output ports, with four USB-A ports and a single USB-C port.

45W Power Delivery port + 4 USB-A Ports

Each of the USB-A ports has a charging speed of 5V/2.4A.

The USB-C Power Delivery port has a faster than normal charging speed of 45W and that can charge the iPad Pro at its max charging speed and it also charges USB-C compatible MacBooks at faster charging speeds.

Just remember that you have to use a USB-C to Lightning charging cable to be able to charge your iPad Pro with the USB-C port.

Read Review for RAVPower 5-Port Power Delivery USB-C Charging Station

Specs of the RAVPower 5-Port Power Delivery USB-C Charging Station:

  • Output:

USB-C Power Delivery Port: 5V/2.4A | 5V/3A | 9V/3A | 15V/3A | 20V/2.25A (45W)

USB-A Port: 5V/2.4A

Max Output: 60W

  • Input: 100-240 AC Input
  • LED Power Indicator: Single Green LED Light
  • Size: 3.9 x 2.7 x 1.1 inches
  • Weight: 8.1 Ounces

Car Chargers for the iPad Pro

Car charging has become something that is very useful now because now car chargers are quite powerful and that means you can charge your devices up to a good point while you’re driving to your destination. Another part that makes them great is that they have different built-in components that can make charging easier to do.

Anker PowerDrive Lightning/ PowerDrive Elite with Lightning Connector

 

Having a built-in charging cable with any charger is very useful because you’re always going to have a way to charge your compatible device with it. In this case, Anker has two major car chargers that are able to charge your iPad without needing an external cable.

Only compatible with Lightning Devices

There’s the PowerDrive Lightning car charger that has a single built-in cable and no USB ports. The PowerDrive Lightning is the perfect charger if you have an iPhone or an iPad that you want to charge in your car. Not only because of the built-in lightning cable but also because the charging speed of the car charger is 5V/2.4A.

So an iPhone and an iPad can charge at their max charging speed when it comes to charging with the PowerDrive Lightning Car Charger.

The other car charger that Anker has with a built-in Lightning cable is the PowerDrive Elite. This car charger has a single built-in Lightning connector and it also has a USB port.

A Built-in Cable along with a Port

The Lightning connector portion of the car charger has a charging speed of 5V/2.4A and the USB port also has a 5V/2.4A speed.

The max output of the car charger is 4.8A. As a result, you can use both of the ports at their max charging speed at the same time.

What makes this car charger very convenient to use is that you’ll always have a cable that you can use with your iPhone or iPad, then you can have another device charging with another cable using the other USB port.

Specs of the Anker PowerDrive Elite 2 Car Charger with Lightning Cable:

  • Output:     USB Port – 5V/2.4A  | Lightning Cable: 5V/2.4A | Max Output – 4.8A
  • Input: AC 100~240V 50/60Hz
  • LED Power Indicators: A Single Blue LED Light
  • Size: 2.4 x 1.4 x 1.4 inches
  • Weight: 0.6 ounces

Aukey 2-Port Wall Charger

With all that said, if you don’t want any built-in charging cable with your car charger, then simple car chargers such as this Aukey 2-Port car charger is going to be more useful.

One of the Smallest 2-Port Wall Chargers

This car charger is one of the smallest 2 port car chargers on the market and yet it still holds onto to its powerful speeds.

Each of the two ports has a charging speed of 5V/2.4A and the max output of the car charger is 4.8A, so you can use each of the ports at their max potential.

Read Review for Aukey 2-Port Wall Charger

Specs of the Aukey Dual Port USB Wall Charger:

  • Output:     Per Port – 5V/2.4A            Max Output – 4.8A
  • Input: AC 100~240V 50/60Hz
  • LED Power Indicators: A Single White LED Light
  • Size: 1.2 x 1.4 x 1.2 inches
  • Weight: 0.8 Ounces

Aukey / Anker 4-Port Car Charger

pic-1

Then there are car chargers that have lots of ports and these are ones that are going to be very useful for those that have lots of devices to charge while they’re driving. These are 4-Port car chargers.

There are two 4-Port car chargers above, there’s Anker PowerDrive 4 and the Aukey’s 4-Port car charger. Each of them is equally impressive as both of them have each of their ports at a charging speed of 5V/2.4A and the max output of each of the charger is 9.6A.

These are the perfect car chargers to charge your iPad, while you charge 3 other devices at the same time as well. Aukey even has a 4-Port car charger version that uses Quick Charge for those that own Quick Charge compatible devices.

Read Review for Anker PowerDrive 4 Car Charger

Specs of the Anker 4-Port Car Charger:

  • # Of Ports: 4
  • Output: 5V/2.4A Per Port
  • LED Power Indicators: Just a single Blue LED light within the car charger
  • Size: 3.4 x 1.9 x 1 inches
  • Weight: 1.6 ounces
  • 18-month warranty

Nekteck 45W USB-C Power Delivery Car Charger

The final car charger and charger that we have to recommend is this Nekteck Power Delivery car charger.

Yes, there really is Power Delivery used with this car charger, because it has a USB-C Power Delivery port that has a output of 45W.

There’s also a USB-A port with this car charger that has 5V/2.4A charging speed.

The Power Delivery charging power from this car charger is very good and can charge your iPad Pro at its max charging speed while you’re driving. You can also charge another device at the same time, too.

Read Review for Nekteck USB-C Power Delivery Car Charger

Specs of the Nekteck 45W USB-C Power Delivery Car Charger:

  • Output:

USB-C Power Delivery Port: 5V/9V/12V/15V-3A | 20V-2.25A

USB-A Port: 5V/2.4A

  • Input: DC 12-18V
  • LED Power Indicator: Single Blue LED Power Light
  • Size: 2.9 x 1.6 x 1.6 inches
  • Weight: 3.2 Ounces

Readers like you help support Charger Harbor. When you make a purchase using links on our site, we may earn an affiliate commission. Read More.