Nearly all devices that were once meant to placed in a single spot, are now becoming portable and that’s really the next step when it does come to the devices that require a constant source of power. Which would be to have an onboard battery so you can take it with you anywhere. Speakers are one of the major devices that has become easily portable and now there are a ton of portable Bluetooth speakers on the market now and the demand for them has increased because listening to good quality music while you’re on the move is a great experience.
One of the most purchased Bluetooth speakers on Amazon is the Oontz Angle 3 Bluetooth portable speaker. It has one of the best quality sounds, and it’s also water resistant up to an IPX5 rating. Of course, that really only means that it can withstand splashes of water and cannot survive being submerged underwater.
One of the most important parts when it comes to owning a portable device such as this Oontz speaker is recharging it. You’re eventually going to have to recharge it and if you don’t know what the best chargers for the Oontz speaker are, well Charger Harbor has chosen the best chargers for the speaker.
The chargers that we’ve chosen feature the fastest charging speed, and for the portable chargers, there’s enough power capacity to charge the Oontz speaker to its full power.
Best Portable Chargers for the Oontz Portable Speaker
Portable chargers have grown exponentially in the past few years and that’s because we’re able to take the charger and our devices that will eventually need recharging wherever we want. The Oontz speaker has a 2,200mAh battery capacity so it’s important to purchase a power bank that has enough power capacity that can charge the speaker to its full power. Also, all of the chargers within this guide are able to charge the speaker at its max charging speed too, as it only has a max recharge rate of 5V/1.0A.
So we usually start off guides smoothly with some simple power banks, but since this Oontz speaker has partial water-resistance, it only makes sense to choose some water-resistant portable chargers to go along with the device that’s being charged. In this case, we’ve chosen the EasyAcc 20,000mAh Rugged Portable Charger,
Let’s go over the powering features first. This EasyAcc charger has a 20,000mAh power capacity which can charge the Oontz speaker to its full power about 6 times over, and you can, of course, use that capacity towards charging some other devices at the same time. There are two USB-A charging ports with this power bank. One of the ports has a charging speed of 5V/2.4A and the other port has a charging rate of 5V/1.0A. The max output of this charger is 3.4A, so you can use the max output of each port at the same time.
Either of the two ports on this charger can charge the Oontz speaker at its max charging speed.
The build quality of this power bank is very good with its use of IP67 water resistance. The water resistance grade means that this EasyAcc portable charger is able to be submerged underwater for about 30 minutes and still be functional after.
Specs of the EasyAcc 20,000mAh Rugged Power Bank:
- Capacity: Advertised: 20,000mAh Output Capacity 15,000-18,000mAh
Port 1: 5V/2.4A
Port 2: 5V/1.0A
- Input: 5V/2.0A via Micro USB Input
- LED Power Indicators: 4 LED Power Indicators
- Size: 6.3 x 3.5 x 1.1 inches
- Weight: 1.2 Pounds
If you want a power bank that can only recharge your Oontz speaker to its full power about only one single time, then the Anker PowerCore 5000 Slim portable charger is the way to go. A single charge is what most of us actually need, and that’s definitely the case when people are searching for a power bank for their smartphone that can charge their smartphone to full power only a single time.
So this charger has a 5,000mAh power capacity, so you can charge the Bluetooth speaker to its full power only a single time and there’s going to be some extra power left over. The reason that this charger isn’t able to charge this Oontz speaker to full power twice, is because power is lost during charging, just like with all power banks on the market.
This PowerCore 5000 Slim charger only uses a single USB-A port and it has a charging rate of 5V/2.0A. So it’s able to charge the speaker at its max charging speed.
Perhaps the best part about this power bank and one of the reasons that lots of people purchase it is because of its very slim and small form factor. It only has a length of 5 inches and a thickness of 0.4 inches. You can very well just wrap a Micro-USB charging cable around this power bank, slide it into your pocket and take it out when the need arises.
Specs of the Anker PowerCore 5000 Slim:
- Capacity: Advertised: 5,000mAh Output Capacity: 4,000mAh
- Output: 5V/2.0A
- Input: 5V/2.0A via Micro USB Input
- LED Power Indicators: 3 LED Power Capacity Indicators
- Size: 5 x 2.5 x 0.4 inches
- Weight: 4.2 Ounces
RAVPower 10,050mAh Water Resistant Power Bank
Another water-resistant power bank is this RAVPower charger. The reason that we’re adding another one to this guide is that this one has a lower capacity and at the same time it has a lower price that more people can consider purchasing.
It has a 10,050mAh power capacity which is enough power to charge the Oontz speaker to its full power about three times if you’re just using the charger to solely charge the speaker. There are two USB-A charging ports on this power bank.
One of the ports has a charging rate of 5V/2.4A and the other port has a charging rate of 5V/1.0A. The max output of this charger is 3.4A, so just like the EasyAcc power bank that we mentioned before, this charger is also able to use both of its ports at max power at the same time. One other part, other than its power capacity that’s the reason for a lower price is the water-resistance level that this charger has.
This power bank has an IP67 water-resistance rating and it’s with that level that this charger is able to be resistant to powerful jets of water. So you can splash this power bank with water while it’s ports are covered, but you can’t submerge it or else it will be damaged.
Specs of the RAVPower Rugged Power Bank:
- Capacity: 10,050mAh
- Output: 2.4A For One Port / 1.0A For the Other Port
- Input: 2.0A via Micro USB Input
- LED Power Indicators: Four-LED status system
- Size: 4.6 x 2.8 x 0.9 inches
- Weight: 7.4 ounces
Another RAVPower portable charger that we recommend and the final power bank that we’re going to mention is this RAVPower 22,000mAh 3-port charger. It has enough power capacity to charge Oontz portable speaker to its full power about 8 times if that’s the only device that you’re charging with this power bank. That said, it’s definitely not going to be the only device that you want to charge with this power bank because that’s a lot of power to actually go around to charge smartphones and tablets a few times too.
The charging power with this RAVpower portable charger is impressive with it using three USB-A ports. Each of ports has a charging speed of 5V/2.4A, and the max output of the charger is 5.8A. Even if you’re charging three devices at once with this power bank, and one of the devices that you’re charging is the Oontz speaker, it’s able to charge at its max charging speed. An impressive high capacity power bank and one you should definitely consider getting.
Specs of the RAVPower 22,000mAh Power Bank Charger:
- Capacity: Advertised: 22,000mAh Output Capacity: 20,000mAh / 18,000mAh / <15,000mAh
Per Port: 5V/2.4A
Max Output: 5.8A
- Input: 5V/2.4A via Micro USB Input
- LED Power Indicators: 4 LED Power Capacity Indicators
- Size: 6.5 x 0.9 x 2.8 inches
- Weight: 14.4 Ounces
Best USB Wall Chargers for the Oontz Bluetooth Speaker
A USB wall charger is likely the charging electronic that you’re going to use the most when it comes to charging the Oontz Bluetooth speaker and that’s because it’s just so simple to use. Wall chargers are also the one charging electronics that come with most of the devices that we purchase such as smartphones and tablets. Unfortunately, the Oontz speaker only comes with a Micro-USB charging cable and not a USB wall charger.
Anker PowerPort 2 Wall Charger
Anker is a leading brand in charging electronic products and the Anker PowerPort 2 wall charger is basically proof of that. That’s because this charger has been purchased a ton on Amazon. It has two USB-A ports with each of the ports having a charging rate 5V/2.4A and the max output of the charger is 5V/4.8A. So you can use the max charging rate of each port at the same time.
The size of this charger is also another great part, as this charger has retractable AC adapter that basically makes this charger into a cube that’s very easy to take anywhere that you want.
Specs of the Anker PowerPort 2:
- Ports: 2
- Quick Charge: No
- Output: 2.4A Per Port
Max Output: 4.8A
RAVPower 4-Port Charging Station
If you’re searching for more than just two ports, then there’s RAVPower’s 4-port charging station. Or at least there are actually two choices from RAVpower in this case, with them having a charging station variant or a 4-port wall charger version. The charging station is perfect if you want to have your devices closer to you while they charger, while the wall charger one just stays next to the AC wall outlet.
Both of them are equal in power, with them being able to charge 4 devices at once and each of the ports is able to charge at 2.4 Amps. The max output of the charger is 8A, so if you’re using the max of the charger then each of the ports would output 5V/2.0A. Which is more than enough to charge the Oontz speakers at its max charging rate. Charging four devices at once is also a great experience and very useful too.
Specs of the RAVPower 40W 8A 4-Port Wall Charger:
Max Output Per Port: 5V/2.4A
Max Output Capabilities: 8A
- Input: AC 100-240V
- Quick Charge: No
- LED Power Indicator: 1 Green LED at the top of the Charging ports
- Size: 3.6 x 2.3 x 1.1 inches
- Weight: 5.3 Ounces
Anker PowerPort Speed 4 USB Wall Charger
One final USB wall charger that we wanted to recommend for charging not only your Oontz portable speaker with but also for charging your other devices and most importantly a Quick Charge compatible smartphone with. This Anker wall charger has four USB-A ports with one of the ports using Quick Charge 3.0 that’s very useful for charging a Quick Charge compatible smartphone at its max charging speed.
Each of the standard ports on this charger has a charging rate of 5V/2.4A, and you’re able to use the Quick Change port and the USB-A ports at the same time. So charging your Oontz potable speakers at its max charging is not going to be a problem. Even with all this power, this charger still manages to just use an AC adapter that’s useful for portable reasons as it makes this charger a cube for you to take it anywhere.
Specs of the Anker PowerPort Speed 4 USB Wall Charger with Quick Charge 3.0:
Quick Charge Port: 3.6 – 6.5V/3.0A | 6.5 – 9V/2.0A | 9-12V/1.5A
USB Port: 5V/2.4A
Max Output: 43.5W or 8.7A
Best Car Chargers for the Oontz Bluetooth Speaker
Car charging may not be the most popular method of charging it’s most definitely very useful even though many people might not use it. Charging your portable devices while you’re driving is the best time to charge your devices as you’re paying attention to the road and not worrying about using your smartphone, and in this case, using your Speaker. So let’s see what car charging has to offer.
Anker PowerDrive 2 Car Charger
The first car charger that we have to recommend is from Anker and it’s just like their PowerPort 2 wall charger that mentioned earlier with this charger using two ports Each of the ports on this charger has a charging rate of 5V/2.4A and the max output of the charger is 4.8A. Therefore you can use the max power of each of the ports at the same time.
Specs of the Anker PowerDrive 2:
- # Of Ports: 2
- Output: 5V/2.4A Per Port
Max Output: 4.8A
Anker PowerDrive 4 Car Charger
One other car charger that we found to be very useful if you want to charge lots of devices at once is Anker’s PowerDrive 4. It is exactly what it sounds like, with this car charger using 4 USB-A ports. So you can actually charge four devices at once. Each of the ports has a charging rate of 5V/2.4A and the max output is 9.6A. So what’s even more surprising is that you’re able to use the max power of each of the ports at the same time, as the max output of the charger allows you to do that.
Specs of the Anker PowerDrive 4 Car Charger:
- # Of Ports: 4
- Output: 5V/2.4A Per Port
- LED Power Indicators: Just a single Blue LED light within the car charger
- Size: 3.4 x 1.9 x 1 inches
- Weight: 1.6 ounces
- 18-month warranty