A Dashcam is basically a need for when you’re a car owner and that’s because you never know when you might need it. Your safety matters and we hope that you never get into an accident and if you already have, then we hope that you never get into another one. However, if the unfortunate incident does occur, then you want a clear and cut footage about what happened so you can prove what really happened instead of relying on bystanders or possibly the other person that was involved in the accident.
Most Dash cams on the market are powered by either a car charger and or portable charger. The great thing about this is that it means that most Dash cams use a Micro-USB input port to be powered. If you’ve somehow lost your car charger or want a better quality car charger than the one that came with your Dashcam then we’ve chosen the best car chargers for Dash cams.
Another charging electronic that’s useful for powering Dash cams are portable chargers. Also, known as power banks, portable chargers are also devices that can power a dashcam that some people may use if they want their cam to record even while their car charger is off. In this case, we’re going to start off the guide with the best portable chargers that you can use to power a Dashcam and then move onto car chargers that can give you a constant supply of power while your car is on.
All Chargers Mentioned in this Guide:
Best Portable Chargers for Dash Cams
Portable chargers have gained quite a lot of popularity in the past few years and it makes sense that they have grown as well. That’s because they’re charging electronics that can go with us anywhere. That’s the reason that we’re here to recommend power banks to power a Dashcam since they have batteries that hold a power capacity.
Speaking of power capacity, we’re going to be mentioning many high capacity portable chargers within this guide for Dash cams. That’s simply because you want a power bank that can last long and one that you don’t have to recharge constantly at the end of each day.
Anker PowerCore 20100 Portable Charger
One of the most purchased high capacity power banks on the market are also from the leading brand within the charging electronic space. That would be, Annker. This Anker PowerCore 20100 portable charger has everything pretty much nailed down when it comes to standard high capacity power banks.
It has a 20,100mAh power capacity that’s going to be useful for powering a Dash cam for many hours. You likely won’t have to recharge the power bank for a full week or maybe even more than that depending on your usage of it.
The other power spec that you should focus on when it comes to high capacity power banks and basically any portable charger that you purchase in general is the charging speed. There are two USB-A ports on this power bank and each of the two ports has a charging speed of 5V/2.4A. The max output of the power bank is 4.8A.
When it comes to power banks providing power to Dash cams then you want to make sure that the port you’re using has a charging speed of 5V/2.0A or higher. In this case, there’s definitely enough power with both ports outputting 2.4A and the best is that you’re able to use the max power of each port at the same time.
Specs of the PowerCore 20100:
- Capacity: 20,100mAh
- Output: 2.4A Per Port | 4.8A Max Output
- Input: 2.0A via Micro USB Input
- LED Power Indicators: Four-LED status system
- Size: 6.5 x 2.3 x 0.9 inches
- Weight: 12.6 ounces
RAVPower 22,000mAh Power Bank with 3-Ports
Going a little higher on the power capacity scale, RAVPower’s 22,000mAh portable charger is also another great entry level high capacity power bank. It has about 2,000mAh more than the previous Anker charger that we mentioned, so there’s quite a good amount of power capacity to be used while your car is off and being powered through this power bank.
The benefit of getting this power bank over the PowerCore 20100, is that this one has three USB charging ports. Now, just realize that if you’re charging a few devices with this power bank, that you’re going to end up burning more into the power capacity that it has. So its longevity will be cut-short the more devices you charge at once and then you’ll have to recharge it sooner. On the other hand, if you do want to use this power bank for powering a Dashcam and also as a charger that you can take with you, then it’s great.
That’s because its three USB-A charging ports each have a charging speed of 5V/2.4A and the max output is 5.8A. So if you’re charging three devices at once then it’s able to still able to provide a good amount of charging from each of the ports. Charging power from each port is enough to power a Dashcam too.
Specs of the RAVPower 22,000mAh Power Bank Charger:
- Capacity: Advertised: 22,000mAh Output Capacity: 20,000mAh / 18,000mAh / <15,000mAh
Per Port: 5V/2.4A
Max Output: 5.8A
- Input: 5V/2.4A via Micro USB Input
- LED Power Indicators: 4 LED Power Capacity Indicators
- Size: 6.5 x 0.9 x 2.8 inches
- Weight: 14.4 Ounces
One of the most useful portable chargers that uses 4 USB-A charging ports is EasyAcc’s 26,000mAh power bank. There’s a lot of power capacity to be used with this charger with its 26,0000mAh power capacity that can be used to power your Dashcam for weeks. Or you can very well just take it with you while you’re on the move and charge your smartphones, and tablets too.
There are a total of four USB-A charging ports on this power bank. Most portable chargers usually just make use of three output ports, but this one goes a little further. Each of the ports is capable of charging at 5V/2.4A and the max output of the charger is 4.8A. So you can use the max power of two USB ports at the same time. That said, if you want to power your Dashcam and at the same time charge a smartphone or tablet, then we highly recommend only charging a single other device.
That’s because charging more than two devices at once will split the max output for this power bank.
Recharging this EasyAcc portable charger is also a great experience and that’s because it has two Micro-USB input ports. You can use the two input ports at the same time and each of the input ports has a recharging speed of 5V/2.0A. So when you use them together you’re able to recharge the power bank at 4A speed.
Specs of the EasyAcc Monster 26,000mAh Power Bank:
- Capacity: Advertised: 26,000mAh Output Capacity: 22,000mAh
- Output: Per Port: 5V/2.4A Max Output: 4.8A
2 Micro-USB Input Ports / Per Port: 5V/2.0A / Max Input:4.0A
RAVpower 32,000mAh Power bank
Yes, RAVPower even has a portable charger with a 32,000mAh power capacity that can power your Dashcam for many weeks, and you’ll probably be wondering when it’s going to run out of the power. At the same time using this power bank to charge smartphones is also a great idea.
Charging with this RAVpower 32,000mAh power bank can be done through three USB-A ports. Each of the ports has a charging speed of 5V/2.4A. The max output for his power bank is 6A. This is really good and that’s because even if you’re using the max output of 6A, each port can still output a charging speed of 5V/2.0A. So you can basically power your Dashcam, and charge two other devices at the same time with this power bank.
Recharging this power bank isn’t anything special and that’s because it simply has a single Micro-USB input port that has a recharge rate of 5V/2.4A. So just make sure you use a wall charger that has 2.4A ports to recharge this power bank as fast as possible.
Specs of the RAVPower Ace Series 32,000mAh Portable Charger:
- Capacity: Advertised: 32,000mAh Real Capacity: 22,200mAh
Speed Per a Port: 5V/2.0A
Max Output: 6A
- Input: 5V/2.4A Via Micro-USB Input
- LED Power Indicators: 4 LED Power Capacity Indicators
- Size: 7.7 x 4 x 1.3 inches
- Weight: 1.3 Pounds
Then on Anker’s side, they have their PowerCore 26800 portable charger. It’s exactly what it sounds like and that would be this portable charger having a 26,800mAh power capacity that can be useful for powering a Dashcam for a very long time. While at the same time providing many full charges for a smartphone and other USB chargeable devices.
This PowerCore 26800 portable charger uses three USB-A charging port and each port has a charging speed of 5V/2.4A and the max output of the power bank is 6A. So just like the RAVPower portable charger that we mentioned earlier, even with the max output being reached with charging three devices at once. Each port is still able to output a charging speed of 5V/2.0A. Still fast enough to power a Dashcam at the same time.
This portable charger also has a powerful recharging method in place with there being two Micro-USB input ports being used. So you can recharge this power bank at a 4A recharging speed when you use them both at the same time.
Specs of the Anker PowerCore 26800 Portable Charger:
- Capacity: Advertised Capacity: 26,800mAh Output Capacity: 24,400mAh
Per Port – 5V/3.0A
Max Output – 6A
5V/2.0A Per Micro USB Input
4A Total if both Micro-USB Inputs are used
- LED Power Indicators: Four-LED status system
- Size: 7.1 x 3.2 x 0.9 inches
- Weight: 1.1 Pounds
Aukey 30,000mAh Power Bank with Two USB-A Ports and Two Input ports
Aukey is a brand that is quite similar to Anker and it shows with both the design of their portable chargers and also the quality too. This 30,000mAh power bank from Aukey just goes to show what the brand is capable of. As there’s a lot of power to use so you don’t have to worry about your power bank running out of power anytime soon. Charging with this 30,000mAh Aukey power bank is also very good.
It has two USB-A output charging ports, with each of the ports outputting a charging speed of 5V/2.4A and the max output of the charger is 4.8A. As a result, you can use the max output of each port at the same time.
Recharging this power bank can be done through one of two ports, so they can’t be used at the same time. There’s a Lighting input and a Micro-USB input. Each of the input ports has a recharging speed of 5V/2.0A. It’s very cool that this power bank uses a Lighting input for iPhones users as many power banks on the market don’t even use a Lightning input at all.
Aukey 30,000mAh Portable Charger:
- Capacity: Advertised: 30,000mAh Output Capacity: 27,000mAh
AiPower Port Charging Speed: 5V/2.4A
Max Output: 4.8A
Lightning Input Port: 5V/2.0A
Micro-USB Input Port: 5V/2.0A
- LED Power Indicators: Power Button Indicates 3 Colors
- Size: 5.9 x 3.3 x 1.1 inches
- Weight: 1.4 Pounds
Best Car Chargers for Dash Cams
A car charger is the main method that a Dashcam is powered from, as most Dash cams on the market come with a car charger. We’ve chosen the best car chargers for you to use to power your Dashcam that provides an ample amount of power to make your Dashcam. While at the same time, these car chargers also feature another port that you can use to charge your other devices.
Anker PowerDrive 2 Car Charger
A very simple, but at the same a time a very powerful car charger is Anker’s PowerDrive 2 car charger. It has two USB-A charging ports and each of two ports has a charging speed of 5V/2.4A. The max output of the charger is 4.8A. So you can use the max power of each of the two ports at the same time. Powering your Dashcam while at the same time charging a smartphone is no problem with this car charger.
Specs of the Anker PowerDrive 2:
- # Of Ports: 2
- Output: 5V/2.4A Per Port
Max Output: 4.8A
If you want double the ports and wish to charge more than just two devices at once while you’re driving because you’ve got lots of passengers with you, then Anker’s PowerDrive 4 car charger is more helpful. There are indeed four USB-A charging ports with this car charger. Each of the ports has a charging speed of 5V/2.4A and the max output of this charger is 9.6A. So you can basically use the max power of each of the ports at the same time with this car charger.
However, if you want to make sure that your Dashcam is going to receive the power it needs, we recommend just charging two other devices at once with this car charger. As a max output of 9.6A could put a strain on what the car charger is able to provide all at once.
Specs of the Anker 4-Port Car Charger:
- # Of Ports: 4
- Output: 5V/2.4A Per Port | Max Output: 9.6A
- LED Power Indicators: Just a single Blue LED light within the car charger
- Size: 3.4 x 1.9 x 1 inches
- Weight: 1.6 ounces
Aukey 3-Port Car Charger with Quick Charge 3.0 Port
If you’re someone that own a Quick Charge compatible smartphone then you already know just how useful using a Quick Charge port can be. Your smartphone charges up very quickly and one of the best ways to make sure of Quick Charge is while you’re driving because once you reach your destination your smartphone will be charged up to a good point.
If that’s the case, then we highly recommend Aukey’s 3-port car charger. It uses a single Quick Charge 3.0 port, and the two other USB-A ports have charging speed of 5V/2.4A. The max output fo this charger is 42W. So you can use the Quick Charge port along with a standard port at the same time.
In this case, you would use a standard port with your Dashcam and of course, use your Quick Charge compatible smartphone with the Quick Charge port. You can charge three devices at once with this car charger, but we recommend not to as the Quick Charge port and a single port used at the same time already use quite a lot of power.
However, if you want to charge three devices at once and not power your Dashcam, then using three devices at once is completely fine.
Specs of the Aukey 3-Port Car Charger with Quick Charge 3.0:
Quick Charge Port: 3.6V-6.5V/3.0A | 6.5V-9V/2.0A | 9V-12V/1.5A
Standard Port Speed: 5V/2.4A
- Input: 12V/24V
- LED Power Indicators: No LED Lights
- Size: 2.4 x 1.2 x 1.2 inches
- Weight: 0.95 Ounces
Aukey 4-Port Car Charger
Another 4-port car charger is from Aukey, and it basically has the same charging power as the Anker PowerDrive 4, that we mentioned earlier. It does have a different design though. This charger has a four USB-A charging ports. Each of the ports has a charging speed of 5V/2.4A and the max output of the charger is 9.6A.
Specs of the Aukey 4-Port Car Charger:
- # Of Ports: 4
Per Port: 2.4A Per Port
Max Output: 9.6A